ABB i-bus KNX Product Manual page 7

®
ABB i-bus KNX
General
The application program offers a range of functions:
Switching, dimming, setting of brightness values
Status feedbacks via common or separate communication objects
Status response of a lamp and/or ballast malfunction
Programming of individual maximum and minimum dimming limit values (dimming thresholds)
Different dimming speeds for switching, setting brightness values and dimming
Reaction at DALI and KNX voltage failure and recovery
Programming of the brightness value (power ON level) after a ballast operating voltage recovery
KNX control of all connected DALI devices without prior commissioning (DALI group assignment)
Triggering of the emergency lighting test via a DALI emergency lighting converter
Transfer of the emergency lighting test results to the KNX
Various operating modes, e.g.:
Function Slave for integration of the lighting groups in an energy efficient lighting control
14 independent light scenes, which can be recalled or stored via 1 bit or 8 bit telegrams
Function Staircase lighting including pre-warning
Function Sequence for programming of running lights or colour effects
Function test
Duration test
Partial duration test
Battery charge state
DGN/S 1.16.1 | 2CDC 507 114 D0201 5