ABB i-bus KNX Product Manual page 123

®
ABB i-bus KNX
Commissioning
No.
46, 55...
158, 166
This communication object is enabled, if in
Obj. "Number of faults statistic" has been parameterized with option yes.
This communication object consists of 4 bytes. The individual bytes contain information about the number of faults DALI
devices in the lighting group.
The sending behaviour using this communication object can be parameterized in the
The following numbering applies for the following list:
High byte
31
2 2
15
2 2
The bit number is identical with the exponent of the bit, e.g. number 2 complies with 2
Bit 0...5
Bit 6 and 7
Bit 8...13
Bit 14
Bit 15
Bit 16...21
Bit 22
Bit 23
Bit 24...29
Bit 30
Bit 31
47, 56...
159, 167
Communication objects are not used.
Function
Number of faults statistic
1)
30 29 28 27 26 25 24
2 2 2 2 2 2
14 13 12 11 10 9 8
2 2 2 2 2 2
= contains as a value the number of DALI ballasts in the lighting group
= 0, without function
= contains as a value the number of emergency lighting converters in the lighting group
= 0, without function
= 1, at least one emergency lighting converter in the lighting group is faulty
= contains as a value the number of faulty lamps in the lighting group
= 1, at least one lamp in the lighting group is faulty
= 1, at least one lamp in a normal light in the lighting group is faulty
= contains as a value the number of faulty DALI devices (ballasts & converters) in the lighting group
= 1, at least one ballast of an emergency light in the lighting group is faulty
= 1, at least one ballast of a normal light in the lighting group is faulty
Empty
1)
Communication object name
Group x
Parameter window – Gx Status, page 60, the parameter Status response statistic
Low byte
23 22 21 20 19
2 2 2 2 2 2
7 6 5 4 3
2 2 2 2 2 2
Data type Flags
4 byte C, R, T
non DPT
Parameter window – Gx Status, page 60.
18 17 16
2 2
2 1 0
2 2
2
.
DGN/S 1.16.1 | 2CDC 507 114 D0201 121