ABB i-bus KNX Product Manual page 63

®
ABB i-bus KNX
Commissioning
With the option yes...two further parameters appear:
Status response of brightness value
of the lighting group
Options:
The parameter defines how the current status of the brightness value of the DALI output (the lighting) is
sent on the KNX.
no: The brightness value is not actively sent on the KNX.
yes: via object "Brightness value/status": The brightness value is sent on the KNX via the communica-
tion object Brightness value/status.
yes: via separate obj. "Status brightness value": An additional communication object Status brightness
value for the status message is enabled.
With the option yes..., a further parameter appears:
send object value
Options: after a change
after request
after a change or request
after a change: The status is sent after a change.
after request: The status is sent after a request.
after a change or request: The status is sent after a change or a request.
no
yes: via object "Brightness value/status"
yes: via separate obj. "Status brightness value"
send object value
Options: after a change
after request
after a change or request
after a change: The status is sent after a change.
after request: The status is sent after a request.
after a change or request: The status is sent after a change or a request.
DGN/S 1.16.1 | 2CDC 507 114 D0201 61