Logging In; User Interface; Setting Ethernet Port Function To Lan - ABB ARG600 Single SIM Variant User Manual

Section 4
Getting started
4.2
4.2.1
4.3
22

Logging in

1. Configure the computer to use the same IP address space as the device.
Example: Laptop IP is 10.10.10.11 with netmask 255.255.255.0.
2. Check the IP configuration with the ping command in the command line.
3. In a Web browser, connect to the device over the HTTPS protocol using the
device's IP address.
Example: The default IP address of the device is 10.10.10.10. The
corresponding address to enter in the browser is https://10.10.10.10/.
Ignore the browser's warning about a self-signed certificate.
4. Enter the username and password.
The default username is "arctic-adm" and the default
password is "arcticm2m". Change the password before
connecting the product to a public network.
5. Click Login.
The Home Page opens.

User interface

The user interface consists of views that can be opened from the menu in the left
pane.

Setting Ethernet port function to LAN

Changing Port function to "LAN" disables automatic IP address detection. If Port
function is set to the default value "auto", the Ethernet LAN port tries to
automatically obtain the IP address using DHCP when the device boots. If the
DHCP discovery fails, the device automatically uses IP address 10.10.10.10.
Change the following setting before changing any other Ethernet
settings.
1. In the left pane, under Network, click Ethernet Port.
2. Set Port function to LAN.
3. Click Submit to save the settings.
1MRS758456 H
ARG600 Single SIM Variant
User Manual