Vi-1-3 Admin Setting - Draytek Vigor2762 series User Manual

Bandwidth Utilisation
Notification Settings
After finishing all the settings here, please click OK to save the configuration.

VI-1-3 Admin Setting

VI-1-3 Admin Setting
This page allows you to set new password for administrator.
294
to apply specific STUN settings (not the STUN Settings
configured for Vigor2133) to VigorAPs to meet specific
requirements, simply check this box. Then, type the server
IP address, server port, minimum keep alive period and
maxmum keep alive period respectively.
To administrator, this feature is useful to monitor the
bandwidth utilization of CPE(s). When the bandwidth used is
over the threshold level (percentage defined in medium and
high fields), a notification will be sent to VigorACS. After a
long time observation, the administrator can determine if it
is necessary to increase the bandwidth setting for that CPE
or not.
Enable – Click it to enable such feature.
Time Period – Choose the time interval (15 mins, 30 mins,
1hour, 3 hours, or 6 hours) for CPE to send a notification of
bandwidth utilization to VigorACS.
WAN – Choose the WAN interface for applying the
bandwidth utilization notification mechanism.
Threshold Level – Set the percentage of bandwidth in
transmission and receiving data as threshold values for CPE
to detect bandwidth utilization.
Line Speed – Set the transmission rate and receiving rate
for specified WAN interface.
Vigor2762 Series User's Guide