Viii-4 Pinging The Router From Your Computer - Draytek Vigor2762 series User Manual

VIII-4 P ing ing
VIII-4 P ing ing
The default gateway IP address of the router is 192.168.1.1. For some reason, you might
need to use "ping" command to check the link status of the router. The most important
thing is that the computer will receive a reply from 192.168.1.1. If not, please check the
IP address of your computer. We suggest you setting the network connection as get IP
automatically. (Please refer to the section VIII-3).
Please follow the steps below to ping the router correctly.
For Windows
For Windows
1. Open the Command Prompt window (from Start menu> Run).
2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/
2000/XP/Vista/7/8). The DOS command dialog will appear.
3. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of "Reply from
192.168.1.1:bytes=32 time<1ms TTL=255" will appear.
4. If the line does not appear, please check the IP address setting of your computer.
For Mac
For Mac
1. Double click on the current used MacOs on the desktop.
2. Open the Application folder and get into Utilities.
3. Double click Terminal. The Terminal window will appear.
4. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of "64 bytes from
192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms" will appear.
424
the Router from
the Router from
OS (Terminal)
OS (Terminal)
Your Computer
Your Computer
Vigor2762 Series User's Guide