Draytek Vigor2762 series User Manual page 484

Example
Example
> ip pubaddr ?
% ip addr <public subnet IP address>
% Now: 192.168.0.1
> ip pubaddr 192.168.2.5
% Set public subnet IP address done !!!
Telnet Command:
Telnet Command:
This command allows users to set the mask for IP routed subnet of your router.
Syntax
Syntax
ip pubmask ?
ip pubmask <public subnet mask>
Syntax Description
Syntax Description
Parameter
?
public subnet IP address
Example
Example
> ip pubmask ?
% ip pubmask <public subnet mask>
% Now: 255.255.255.0
> ip pubmask 255.255.0.0
% Set public subnet mask done !!!
Telnet Command:
Telnet Command:
This command is used for configuring WAN IP Alias.
Syntax
Syntax
ip aux add [IP] [Join to NAT Pool][wanX]
ip aux remove [index]
Syntax Description
Syntax Description
Parameter
add
remove
IP
Join to NAT Pool
wanX
index
474
specified as the public subnet IP address.
ip pub mask
ip pub mask
Description
Display an IP address which allows users set as the public subnet
mask.
Specify a subnet mask. The system will set the one that you
specified as the public subnet mask.
ip aux
ip aux
Description
Create a new WAN IP address.
Delete an existed WAN IP address.
It means the auxiliary WAN IP address.
0 (disable) or 1 (enable).
Add or remove an address for WAN interface.
Type the index number of the table displayed on your screen.
Vigor2762 Series User's Guide