Draytek Vigor2762 series User Manual page 396

Available settings are explained as follows:
Item
General Settings
SMB File Sharing Service
Access Mode
NetBios Name Service
Printer Server
After finishing all the settings here, please click OK to save the configuration.
386
Description
Simultaneous FTP Connections - This field is used to
specify the quantity of the FTP sessions. The router allows
up to 6 FTP sessions connecting to USB storage disk at one
time.
Default Charset - At present, Vigor router supports four
types of character sets. Default Charset is for English based
file name.
Click Enable to invoke SMB file sharing service via the
router.
LAN Only – Users coming from internet cannot connect to
the SMB server of the router.
LAN And WAN - Both LAN and WAN users can access SMB
server of the router.
For the NetBios service of USB storage disk, you have to
specify a workgroup name and a host name. A workgroup
name must not be the same as the host name. The
workgroup name can have as many as 15 characters and the
host name can have as many as 23 characters. Both them
cannot contain any of the following--- ; : " < > * + = \ | ?.
Workgroup Name – Type a name for the workgroup.
Host Name – Type the host name for the router.
Enable – Click it to make Vigor router act as a printer server
(with USB printer attached).
Vigor2762 Series User's Guide