Draytek Vigor2762 series User Manual page 567

Telnet Command: smb setting
Telnet Command: smb setting
This command is used to configure file sharing settings for SMB server.
Syntax Syntax
smb setting [enable/disable]
smb setting show status
smb setting set workgroup [Workgroup name]
smb setting set host [host name]
smb setting set access [LAN or LANWAN]
Syntax Description
Syntax Description
Parameter
enable/disable
show status
Set workgroup [Workgroup
name]
set host [host name]
set access [LAN or LANWAN]
Example
Example
> smb setting enable
SMB service is enabled.
> smb setting set access LAN
Allow SMB access from LAN only.
>
Telnet Command:
Telnet Command:
This command is reserved for future using.
srv dhcp badip
Example Example
> srv dhcp badip
>
Telnet Command:
Telnet Command:
This command allows users to configure DHCP server for second subnet.
srv dhcp public start [IP address]
srv dhcp public cnt [IP counts]
srv dhcp public status
srv dhcp public add [MAC Addr XX-XX-XX-XX-XX-XX]
srv dhcp public del [MAC Addr XX-XX-XX-XX-XX-XX/all/ALL]
Syntax Description
Syntax Description
Parameter
Vigor2762 Series User's Guide
Description
Enable or disable the SMB service.
Display current status of SMB service.
Set a name of workgroup for SMB service.
Set a name of the host for SMB service.
Allow to access into SMB server by LAN or borth LA N and WAN.
srv dhcp badip
srv dhcp badip
srv dhcp public
srv dhcp public
Description
557