Draytek Vigor2762 series User Manual page 14

Vigor2762
Vigor2762
Vigor2762n / Vigor2762ac
Vigor2762n / Vigor2762ac
Interface
Factory Reset
WLAN
ON/OFF/WPS
USB1~USB2
GigaLAN1~LAN4
DSL
I / O
PWR
4
Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press gently and hold
for more than 5 seconds. When the ACT LED blinks rapidly, release the
button. Then the router will restart with the factory default
configuration
Press for less than 2 seconds to switch toggle the router's wireless
interfaces:
For example,

2.4G (On) and 5G (On) – Default state.

2.4G (Off) and 5G (On) – press and release the button
once.

2.4G (On) and 5G (Off) – press and release the button
twice.

2.4G (Off) and 5G (Off) – press and release the button
three times.
When WPS is enabled in the router's web interface, press this button
for more than 2 seconds to enable WPS pairing mode.
Connector for a USB 3G/4G modem, storage, printer or USB
Thermometer
RJ-45 Gigabit Ethernet connectors for local network devices.
GigaLAN4 can be configured as the Ethernet WAN port, see Section 5.3
for details
RJ-11 connector for ADSL or VDSL line
Power Switch. Turns the unit on (I) or off (O)
Connector for the power adapter
Vigor2762 Series User's Guide