Draytek Vigor2762 series User Manual page 599

sys syslog -a <enable> [-<command> <parameter> | ... ]
Syntax Description Syntax Description
Parameter
[<command><parameter>|
...]
-a <1/0>
-s <1/0>
-i <IP address>
-d <port number>
-u <1/0>
-m <1/0>
-f <1/0>
-v <1/0>
-e <1/0>
-c <1/0>
-w <1/0>
-r <1/0>
-t <1/0>
-o <port number>
Example
Example
> sys syslog -a 1 -s 1 -i 192.168.1.25 -d 514
>
Telnet Command:
Telnet Command:
This command is used to configure system time and date.
Syntax
Syntax
sys time server [domain]
sys time inquire
sys time show
sys time zone [index]
Syntax Description
Syntax Description
Parameter
domain
index
Vigor2762 Series User's Guide
Description
The available commands with parameters are listed below.
[...] means that you can type in several commands in one line.
Enable (1) or disable (0) Syslog Access Setup.
Enable (1) or disable (0) Syslog Save to Syslog Server.
Define the IP address of the Syslog server.
Define the port number (1 ~ 65535) as the destination port.
Enable (1) or disable (0) Syslog Save to USB Disk.
Enable (1) or disable (0) Mail Syslog.
Enable (1) or disable (0) Filewall Log.
Enable (1) or disable (0) VPN Log.
Enable (1) or disable (0) User Access Log.
Enable (1) or disable (0) Call Log.
Enable (1) or disable (0) WAN Log.
Enable (1) or disable (0) Router/DSL Information.
Enable (1) or disable (0) AlertLog Setup.
Define the port number (1 ~ 65535) for AlertLog.
sys time
sys time
Description
Type the domain name of the time server. The maximum length is
39 characters.
Different number means different time zone.
1 - GMT-12:00 Eniwetok, Kwajalein
2 - GMT-11:00 Midway Island, Samoa
3 - GMT-10:00 Hawaii
4 - GMT-09:00 Alaska
5 - GMT-08:00 Pacific Time (US & Canada)
6 - GMT-08:00 Tijuana
7 - GMT-07:00 Mountain Time (US & Canada)
8 - GMT-07:00 Arizona
9 - GMT-06:00 Central Time (US & Canada)
589