Draytek Vigor2762 series User Manual page 620

> vpn mroute 1 add 192.168.5.0/24
% 192.168.5.0/24
% Add new route 192.168.5.0/24 to profile 1
Telnet Command:
Telnet Command:
This command allows users to view LAN to LAN VPN profiles.
vpn list <index> all
vpn list <index>com
vpn list<index>out
vpn list <index> in
vpn list<index>net
Syntax Description Syntax Description
Parameter
all
com
out
in
net
<index>
Example
Example
>
vpn list 32 all
% Common Settings
% Profile Name
% Profile Status
% Netbios Naming Packet
% Call Direction
% Idle Timeout
% PING to keep alive
% Dial-out Settings
% Type of Server
% Link Type:
% Username
% Password
% PPP Authentication
% VJ Compression
% Pre-Shared Key
% IPSec Security Method
% Schedule
% Remote Callback
% Provide ISDN Number
% IKE phase 1 mode
% IKE Local ID
610
vpn list
vpn list
Description
It means to list configuration of the specified profile.
It means to list common settings of the specified profile.
It means to list dial-out settings of the specified profile.
It means to list dial-in settings of the specified profile.
It means to list Network Settings of the specified profile.
It means the index number of the profile.
Available index numbers:
1 ~ 32
: ???
: Disable
: Pass
: Both
: 300
: off
: PPTP
: 64k bps
: PAP/CHAP
: on
:
: AH
: off
: off
: Main mode
:
: ???
:
: 0,0,0,0
Vigor2762 Series User's Guide