V-1-1 General Setup - Draytek Vigor2762 series User Manual

Web User Interface
Web User Interface
Below shows the menu items for Firewall.

V-1-1 General Setup

V-1-1 General Setup
General Setup allows you to adjust settings of IP Filter and common options. Here you can
enable or disable the Call Filter or Data Filter. Under some circumstance, your filter set
can be linked to work in a serial manner. So here you assign the Start Filter Set only. Also
you can configure the Log Flag settings, Apply IP filter to VPN incoming packets, and
Accept incoming fragmented UDP packets.
Click Firewall and click General Setup to open the general setup page.
General Setup Page
General Setup Page
Such page allows you to enable / disable Call Filter and Data Filter, determine general rule
for filtering the incoming and outgoing data.
Available settings are explained as follows:
234 Vigor2762 Series User's Guide