Ii-1-2-10 Details Page For Ipv6 - Tspc In Wan1/Wan2/Wan3 - Draytek Vigor2762 series User Manual

Item
RIPng Protocol
Below shows an example for successful IPv6 connection based on PPP mode.
Info
II-1-2-10 Details Page for IPv6
II-1-2-10 Details Page for IPv6
Tunnel setup protocol client (TSPC) is an application which could help you to connect to
IPv6 network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
(http://gogonet.gogo6.com/page/freenet6-account
network connection. TSPC would connect to tunnel broker and requests a tunnel according
to the specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6
prefix from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting router advertisement daemon (RADVD), the PC
behind this router can directly connect to IPv6 the Internet.
78
Description
detection mode, you have to type TTL value.
RIPng (RIP next generation) offers the same functions and
benefits as IPv4 RIP v2.
At present, the IPv6 prefix can be acquired via the PPPoE mode connection which
is available for the areas such as Taiwan (hinet), the Netherlands, Australia and
UK.
– TSPC in WAN1/WAN2/WAN3
– TSPC in WAN1/WAN2/WAN3
) before you try to use TSPC for
Vigor2762 Series User's Guide