Draytek Vigor2762 series User Manual page 525

-a VALUE
-g VALUE
-c VALUE
-v
Example
Example
>
ldap user 1 -n LD_user_test1
Profile Name has been updated!
> ldap user 1 -v
Profile Index:1
Profile Name:LD_user_test1
Common Name Identifier:
Base Distinguished Name:
Additional Filter:
Group distinguished Name:
>ldap user 1 -b ou=People,dc=example,dc=com
Telnet Command: ldap set
Telnet Command: ldap set
This command is used to set general settings (e.g., IP address, port number) for LDAP
server.
Syntax
Syntax
ldap set [Options][Value]
Syntax Description
Syntax Description
Parameter
enable [0-1]
type [0-2]
ssl [0-1]
IP <VALUE>
port <VALUE>
dn <VALUE>
Vigor2762 Series User's Guide
If you have added containers to be published, you may need to
specify additional LDAP filters for each class of objects included
in these containers.
Creating LDAP filters is a fairly complex task that should be
performed by advanced users only. LDAP filters must be
RFC2254-compliant.
For example, to exclude from publication all users who either
belong to the HR department of your company or are members of
the HR Group. For example:
>ldap user 1 -a "(!(|(department=HR)
(memberOf=CN=HRGroup,OU=Groups, DC=acme,DC=com)))"
Additional Filter has been updated.
Setup Group Distinguished Name.
Setup Common Name Identifier.
View detail information of the LDAP profile.
Description
Enable or disable LDAP function.
0 – Disable the function.
1 – Enable the function.
Set the bind type as Simple(0),Anonymous(1), and Regular(2).
Enable or disable LDAP function via SSL tunnel.
0 – Disable the function.
1 – Enable the function.
Set IP address for LDAP server.
Set port number for LDAP server.
Set Regular DN value
515