Draytek Vigor2762 series User Manual page 494

> ip igmp_fl enable
%% ip igmp_fl [enable|disable|status], IGMP Fast Leave is Enabled.
>
Telnet Command:
Telnet Command:
Specify MAC address of certain device as the DMZ host.
Syntax
Syntax
ip dmz [mac]
Syntax Description
Syntax Description
Parameter
mac
Example Example
>ip dmz ?
% ip dmz <mac>,
> ip dmz 11-22-33-44-55-66
> ip dmz ?
% ip dmz <mac>,
>
Telnet Command:
Telnet Command:
This command is to enable /disable private IP DMZ or Active True IP DMZ for DMZ host.
Syntax
Syntax
ip dmzswitch off
ip dmzswitch private
ip dmaswitch active_trueip
Syntax Description
Syntax Description
Parameter
off
private
Active_trueip
Example
Example
> ip dmzswitch ?
%% ip dmzswitch [off|private|active_trueip], DMZ is OFF
> ip dmzswitch private
%% ip dmzswitch [off|private|trueip|active_trueip], PRIVATE IP DMZ
is ON
> ip dmzswitch trueip
> ip dmzswitch active_trueip
%% ip dmzswitch [off|private|trueip|active_trueip], ACTIVE TRUE IP
DMZ is ON
484
ip dmz
ip dmz
Description
It means the MAC address of the device that you want to specify.
now : 00-00-00-00-00-00
now : 11-22-33-44-55-66
ip dmz switch
ip dmz switch
Description
Disable the function of DMZ host.
Enable private IP address of the DMZ host.
Enable active true IP address of the DMZ host.
Vigor2762 Series User's Guide