Draytek Vigor2762 series User Manual page 533

* Service:
- FTP:Yes
- HTTP:No
- HTTPS:No
- TELNET:Yes
- SSH:No
* Subnet:
- LAN 2: disabled
- LAN 3: enabled
- LAN 4: disabled
- LAN 5: disabled
- LAN 6: disabled
- DMZ: disabled
- IP Routed Subnet: disabled
Note: the settings do NOT apply to LAN1, LAN1 is always allowed to
access the router
Telnet Command:
Telnet Command:
This command allows users to reject or accept PING packets from the Internet.
mngt echoicmp [enable]
mngt echoicmp [disable]
Syntax Description
Syntax Description
Parameter
enable
disable
Example
Example
> mngt echoicmp enable
%% Echo ICMP packet enabled.
Telnet Command:
Telnet Command:
This command allows you to specify that the system administrator can login from a specific
host or network. A maximum of three IPs/subnet masks is allowed.
mngt accesslist list
mngt accesslist add [index][ip addr][mask]
mngt accesslist remove [index]
mngt accesslist flush
Syntax Description
Syntax Description
Parameter
list
add
index
ip addr
Vigor2762 Series User's Guide
mngt echoicmp
mngt echoicmp
Description
It means to accept the echo ICMP packet.
It means to drop the echo ICMP packet.
mngt accesslist
mngt accesslist
Description
It can display current setting for your reference.
It means adding a new entry.
It means to specify the number of the entry.
It means to specify an IP address.
523