Draytek Vigor2762 series User Manual page 612

[p1_untag] [on/off]
Example
Example
> vlan tagged unlimited on
unlimited mode is ON
Telnet Command: vlan vid
Telnet Command: vlan vid
This command is used to configure VID number for each VLAN channel.
Syntax
Syntax
vlan vid n vid_no
Syntax Description
Syntax Description
Parameter
n
vid_no
Example
Example
> vlan vid 1 4095
VLAN1, vid=4095
Telnet Command: vlan sysvid
Telnet Command: vlan sysvid
This command is used to modify and show the scope (reserved 78) of the VLAN IDs used
internally by the system.
Syntax
Syntax
vlan sysvid [show | n]
Syntax Description
Syntax Description
Parameter
show
n
Example
Example
> vlan sysvid 100
You have set system VLAN ID to range: 100 ~ 177,
We recommend that you reboot the system now.
> vlan sysvid 200
You have set system VLAN ID to range: 200 ~ 263,
602
VLAN are tagged.
unlimited off: It does not allows the incoming of untagged packets.
P1_untag on: It allows the incoming of untagged packets form LAN
port 1.
P1_untag off: It does not allow the incoming of untagged packets
from LAN port 1.
Description
It means VLAN channel.
The ranage is from 0 to 7.
It means the value of VLAN ID. Type the value as the VLAN ID
number. The range is form 0 to 4095.
Description
It means to show the scope of VLAN ID used internally.
It means the value to be set as VLAN ID.
The range is from 0 to 4018.
Vigor2762 Series User's Guide