Telnet Command:
Telnet Command:
This command can set and remove the name for the router when DHCP mode is selected for
WAN.
sys name [wan1] [ASCII string]
sys name [wan1] clear
Syntax Description
Syntax Description
Parameter
wan1
ASCII string
Example
Example
> sys name wan1 drayrouter
> sys name ?
% sys name <wan1/wan2> <ASCII string (max. 20 characters)>
% sys name <wan1/wan2> clear
% Now: wan1 == drayrouter, wan2 ==
Note: Such name can be used to recognize router's identification in SysLog dialog.
Telnet Command:
Telnet Command:
This command allows users to set password for the administrator.
sys passwd [ASCII string]
Syntax Description
Syntax Description
Parameter
ASCII string
Example
Example
> sys passwd admin123
>
Telnet Command:
Telnet Command:
This command allows users to restart the router immediately.
Example
Example
> sys reboot
>
580
sys name
sys name
Description
It means to specify WAN interface for assigning a name for it.
It means the name for router. The maximum character that you
can set is 20.
sys passwd
sys passwd
Description
It means the password for administrator. The maximum character
that you can set is 23.
sys reboot
sys reboot
Vigor2762 Series User's Guide