Draytek Vigor2762 series User Manual page 496

Telnet Command:
Telnet Command:
This command allows users to set maximum bandwidth limit number for the specified IP.
ip bandwidth on
ip bandwidth off
ip bandwidth default [tx_rate][rx_rate]
ip bandwidth status
ip bandwidth show
ip bandwidth [add/del] [IP1-IP2][tx][rx][shared]
Syntax Description
Syntax Description
Parameter
on
off
default [tx_rate][rx_rate]
status
show
add
del
IP1-IP2
tx
rx
shared
Example Example
> ip bandwidth default 200 800
> ip bandwidth add 192.168.1.50-192.168.1.100 10 60
> ip bandwidth status
IP range:
192.168.1.50 - 192.168.1.100 : Tx:10K Rx:60K
Current ip Bandwidth limit is turn off
Auto adjustment is off
Telnet Command:
Telnet Command:
This command allows users to set IP-MAC binding for LAN host.
ip bindmac on
ip bindmac off
ip bindmac strict_on
486
ip bandwidth
ip bandwidth
Description
Turn on the IP bandwidth limit.
Turn off the IP bandwidth limit.
Set default tx and rx rate of bandwidth limit. The range is from 0
– 65535 Kpbs.
Display the current settings.
Display all the bandwidth limits settings within the IP range.
Add the bandwidth within the IP range.
Delete the bandwidth within the IP range.
It means the range of IP address specified for this command.
Set transmission rate for bandwidth limit.
Set receiving rate for bandwidth limit.
It means that the bandwidth will be shared for the IP range.
ip bindmac
ip bindmac
Vigor2762 Series User's Guide