Draytek Vigor2762 series User Manual page 645

Example Example
> wl ht bw value 1
BW=0
<Note> Please restart wireless after you set new parameters.
> wl restart
Wireless restart................
Telnet Command:
Telnet Command:
This command allows you to restart wireless setting.
Example
Example
> wl restart
Wireless restart................
Telnet Command:
Telnet Command:
This command allows you to configure WDS settings.
Syntax
Syntax
wl wds mode [value]
wl wds security [value]
wl wds ap [value]
wl wds hello [value]
wl wds status
wl wds show
wl wds mac [value]
wl wds flush
Syntax Description
Syntax Description
Parameter
mode [value]
security [value]
Vigor2762 Series User's Guide
wl restart
wl restart
wl wds
wl wds
Description
It means to specify connection mode for WDS.
[value]: Available settings are :
d: Disable
b: Bridge
r: Repeapter
It means to configure security mode with encrypted keys for WDS.
mode: Available settings are:
disable:
wep:
wpapsk [key]:
wpa2psk [key]:
key: Moreover, you have to add keys for wpapsk, wpa2psk, and
wep, and specify index number of schedule profiles to be followed
by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26 Hexadecimal
digit format; WPA keys must be in 8~63 ASCII text string or 64
Hexadecimal digit format.
e.g.,
wl dual wds security disable
No security.
WEP
WPA/PSK
WPA2/PSK
635