Ii-1-2-15 Details Page For Ipv6 - 6Rd In Wan1 / Wan2 - Draytek Vigor2762 series User Manual

II-1-2-15 Details Page for IPv6
II-1-2-15 Details Page for IPv6
This type allows you to setup 6rd for WAN interface.
Available settings are explained as follows:
Item
6rd Mode
IPv4 Border Relay
IPv4 Mask Length
6rd Prefix
6rd Prefix Length
WAN Connection
Detection
Vigor2762 Series User's Guide
– 6rd in WAN1 / WAN2
– 6rd in WAN1 / WAN2
Description
Auto 6rd – Retrieve 6rd prefix automatically from 6rd
service provider. The IPv4 WAN must be set as "DHCP".
Static 6rd - Set 6rd options manually.
Type the IPv4 addresses of the 6rd Border Relay for a given
6rd domain.
Type a number of high-order bits that are identical across
all CE IPv4 addresses within a given 6rd domain.
It may be any value between 0 and 32.
Type the 6rd IPv6 address.
Type the IPv6 prefix length for the 6rd IPv6 prefix in
number of bits.
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose Always On or Ping Detect for the system to
execute for WAN detection. Always On means no detection
will be executed. The network connection will be on
always.

Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
87