Draytek Vigor2762 series User Manual page 611

Parameter
[1/2/3/4]
Example Example
> vlan subnet group_id 2
% Vlan Group-0 using LAN2
This setting will take effect after rebooting.
Please use "sys reboot" command to reboot the router.
Telnet Command: vlan submode
Telnet Command: vlan submode
This command changes the VLAN encapsulation mechanisms in the LAN driver.
Syntax
Syntax
vlan submode [on|off|status]
Syntax Description
Syntax Description
Parameter
on
off
status
Example
Example
> vlan submode status
% vlan subnet mode : normal mode
> vlan submode on
% vlan subnet mode modified to promiscuous mode.
> vlan submode status
% vlan subnet mode : promiscuous mode
Telnet Command: vlan tagged
Telnet Command: vlan tagged
This command is used to enable or disable the incoming of untagged packets.
Syntax
Syntax
vlan tagged [n] [on/off]
vlan tagged [unlimited] [on/off]
vlan tagged [p1_untag] [on/off]
Syntax Description Syntax Description
Parameter
n
on/off
[unlimited] [on/off]
Vigor2762 Series User's Guide
Description
It means interfaces, LAN1 ~ LAN4.
!
Description
It means to enable the promiscuous mode.
It means to enable the normal mode.
It means to display if submode is normal mode or promiscuous
mode.
Description
It means VLAN channel.
The ranage is from 0 to 7.
It means to enable/disable the tagged VLAN.
unlimited on: It allows the incoming of untagged packets even all
601