Application Notes; How To Assign An Ipv6 Address To Lan Clients - Draytek Vigor2762 series User Manual

Application Notes

Application Notes
A-1

How to assign an IPv6 address to LAN clients?

A-1 How to assign an IPv6 address to LAN clients?
This document introduces how to set up Vigor Router for the LAN clients to obtain an IPv6
address from it.
1. Make sure there is a WAN interface that has IPv6 access available. (See How to configure
IPv6 on WAN interface?)
2. Go to LAN >> General Setup, and click on "IPv6" for the LAN subnet to enter IPv6
setting page.
98 Vigor2762 Series User's Guide