Draytek Vigor2762 series User Manual page 369

Adsl2/2+ and vdsl2 router

Hide thumbs Also See for Vigor2762 series:

Table of Contents

Restore IP Object

To set a new profile, please do the steps listed below:

1. Click the number (e.g., #1) under Index column for configuration in details.

2. The configuration page will be shown as follows:

Available settings are explained as follows:

Address Type

Vigor2762 Series User's Guide

table without any input data) to your hard disk.　

Download – Download the CSV file from Vigor router and

store in your hard disk.

Select – Click it to specify a predefined CSV file.

Restore – Import the selected CSV file onto Vigor router.

Type a name for this profile. Maximum 15 characters are

Choose a proper interface.

For example, the Direction setting in Edit Filter Rule will

ask you specify IP or IP range for WAN or LAN/RT/VPN or

any IP address. If you choose LAN/RT/VPN as the Interface

here, and choose LAN/RT/VPN as the direction setting in

Edit Filter Rule, then all the IP addresses specified with

LAN/DMZ/RT/VPN interface will be opened for you to

choose in Edit Filter Rule page.

Determine the address type for the IP address.

Select Single Address if this object contains one IP address

Select Range Address if this object contains several IPs

within a range.

Select Subnet Address if this object contains one subnet for

Select Any Address if this object contains any IP address.

Select Mac Address if this object contains Mac address.

Show Quick Links

Table of Contents