Iii-1-12 Station List - Draytek Vigor2762 series User Manual

Adsl2/2+ and vdsl2 router
Hide thumbs Also See for Vigor2762 series:
Table of Contents

Advertisement

method, you can install multiple access points with enabling the Roaming feature for each
AP to reach the purpose of expanding wireless signals seamlessly.
These access points connecting for each other shall be verified by pre-authentication. This
page allows you to enable the roaming feature and the pre-authentication.
Available settings are explained as follows:
Item
Disable RSSI Requirement
Strictly Minimum RSSI
Minimum RSSI
After finishing this web page configuration, please click OK to save the settings.

III-1-12 Station List

III-1-12 Station List
Station List provides the knowledge of connecting wireless clients now along with its status
code. There is a code summary below for explanation. For convenient Access Control, you
can select a WLAN station and click Add to Access Control below.
Vigor2762 Series User's Guide
Description
When the link rate of wireless station is too low or the
signal received by the wireless station is too worse, Vigor
router will automatically detect (based on the link rate and
RSSI requirement) and cut off the network connection for
that wireless station to assist it to connect another Wireless
AP to get better signal.
This option is to disable the roaming mechanism.
Vigor router uses RSSI (received signal strength indicator) to
decide to terminate the network connection of wireless
station. When the signal strength is below the value (dBm)
set here, Vigor router will terminate the network
connection for that wireless station.
Minimum RSSI - When the signal strength of the wireless
station is below the value (dBm) set here and adjacent AP
(must be DrayTek AP and support such feature too) with
higher signal strength value (defined in the field of With
Adjacent AP RSSI over) is detected by Vigor router, Vigor
router will terminate the network connection for that
wireless station. Later, the wireless station can connect to
the adjacent AP (with better RSSI).
With Adjacent AP RSSI over – Specify a value as a
threshold.
189

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents