Draytek Vigor2762 series User Manual page 588

This command can set and remove the domain name of the system when DHCP mode is
selected for WAN.
sys domainname [wan1/wan2] [Domain Name Suffix]
sys domainname [wan1/wan2] clear
Syntax Description
Syntax Description
Parameter
wan1/wan2
Domain Name Suffix
clear
Example
Example
> sys domainname wan1 clever
> sys domainname wan2 intellegent
> sys domainname ?
% sys domainname <wan1/wan2> <Domain Name Suffix (max. 40
characters)>
% sys domainname <wan1/wan2> clear
% Now: wan1 == clever, wan2 ==intelligent
>
Telnet Command:
Telnet Command:
This command displays the current interface connection status (UP or Down) with IP
address, MAC address and Netmask for the router.
Example
Example
> sys iface
Interface 0 Ethernet:
Status: UP
IP Address: 192.168.1.1
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-00
Interface 4 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-02
Interface 5 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-03
Interface 6 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
MAC: 00-50-7F-00-00-04
Interface 7 Ethernet:
Status: DOWN
IP Address: 0.0.0.0
578
Description
It means to specify WAN interface for assigning a name for it.
It means the name for the domain of the system. The maximum
number of characters that you can set is 40.
It means to remove the domain name of the system.
sys iface
sys iface
Netmask: 0xFFFFFF00 (Private)
Netmask: 0xFFFFFFFF
Netmask: 0x00000000
Netmask: 0x00000000
Netmask: 0x00000000
Netmask: 0x00000000
Vigor2762 Series User's Guide