General Setup - Draytek Vigor2110 Series Quick Start Manual

3 . 3 . 2 G e n e r a l
3 . 3 . 2 G e n e r a l
1. On the Wireless LAN group, select General Setup. The following page will be
shown as below.
2. Check Enable Wireless LAN to enable the wireless function.
3. At present, the router can connect to 11g Only, 11b Only, 11n Only, Mixed
(11b+11g), Mixed (11g+11n) and Mixed (11b+11g+11n) stations simultaneously.
Simply choose Mixed (11b+11g+11n) mode.
4. Type in the name of the SSID. The default name for SSID is DrayTek. We suggest
you change it to a particular name for your necessity.
SSID (Service Set Identifier) - It is used to name the wireless LAN for
this router, and it must have the same content in client PC/notebook
wireless card(s). SSID can be any text numbers or various special
characters.
5. The default channel is 6. You can change it to an appropriate one if the selected
channel is under serious interference.
Vigor2110 Series Quick Start Guide
S e t u p
S e t u p
23