. PCM Raset Procadure
1. Turn the ignition switch off.
2.
Remove the BACK UP fuse (7 5 A) from the under-hood fuse/relay box for 10 seconds to reset the PCM'
NOTE:
. Disconnecting the BACK UP fuse also cancels the radio preset stations and clock setting. Make note of the radio
presets before removing the tuse so you can reset them.
o The PCM memory can also be cleared by using the OBD ll Scan Tool or Honda PGM Tester'
BACK UP
(7.5 A) FUSE
. Final Procedurg
NOTE: This procedure must be done after any troubleshooting
1. Turn the ignition switch OFF.
2.
Reset the PcM.
3.
Disconnect the OBD ll Scan Tool or Honda PGM Tester from the Data Link Connector, or remove the special
tool from
the Service Check Connector.
4. Turn the ignition switch ON (ll), and set the radio presets and clock setting
14-47