Specifications - GE RSTi-EP User Manual

In the case of a maximum power supply of >8 A and a maximum temperature of >
+55°C (131 °F), all four contacts must be connected with 1.5 mm² wiring.
Caution

4.1.4 Specifications

System data
Connection
Fieldbus protocol
Process image
Number of modules
Configuration interface
Transfer rate
Supply
Supply voltage for system and inputs
Supply voltage for outputs
Max. feed-in current for input modules
Max. feed-in current for output modules
Current consumption from system current path I
Connection data
Type of connection
Conductor cross-section
Weight
Operating temperature
Storage temperature
Air humidity (operation/transport)
Width
Depth
Height
Weight
Configuration
General data, refer to the Section,
GFK-2958E
Chapter 4 Detailed Descriptions of the Fieldbus Network Adapters
EPXPBS001
Input data width
Output data width
Parameter data
Diagnostic data
Fieldbus
RTSi-EP system bus
SYS
Single-wired, fine-wired
The GSD file is available on the Support website
http://support.ge-ip.com
Machine Edition. The GSD supporting a firmware release is part
of the firmware upgrade kit available on the Support website.
General Technical Data for the Fieldbus Network Adapter
RSTi-EP User Manual
9-pole SUB-D socket
PROFIBUS-DP V1
max. 244 bytes
max. 244 bytes
max. 244 bytes
max. 244 bytes
Max. 64 active
Micro USB 2.0
Max. 12 Mbps
Max. 48 Mbps
20.4V – 28.8V
20.4V – 28.8V
10 A
10 A
100 mA
Spring style
0.14 – 1.5 mm2 (AWG 16 – 26)
-20°C to +60°C (-4 °F to +140 °F)
-40°C to +85°C (-40 °F to +185 °F)
5% to 95%, noncondensing as per DIN EN 61131-2
52 mm (2.05 in)
76 mm (2.99 in)
120 mm (4.72 in)
223 g (7.87 oz)
for download and import into Proficy
58