1.7 Mechanical Fixing Elements
The station is fixed in the installation position by an end bracket at either side. The last I/O module is
protected against dust by a cover plate, into which the second end bracket is inserted and screwed
to the mounting rail. Every RTSi-EP network adapter is supplied with a termination kit.
RSTi-EP station fixing elements
1.8 Type Plate
Each network adapter and each module features a type plate, which includes identification
information, the key technical specifications and a block diagram. In addition, a QR code allows for
direct online access to the associated documentation. The software for reading the QR code must
support inverted QR codes. A breakdown of the serial numbers can be found in the table provided in
the annex.
1
2
3
4
5
Type Plate (Example of EP-1214)
GFK-2958E
1 End bracket (left end, on the network adapter
side)
2 Termination kit with end plate and end
bracket (right end)
For vertical installation, a special end bracket
must also be installed below the station.
1 Product number
2 Serial number
3 Manufacturing code
4 ATEX marking
5 QR code
RSTi-EP User Manual
Chapter 1: Introduction
17