GE RSTi-EP User Manual page 112

System data
Data
Interface
System bus transfer rate
Galvanic isolation
Line-to-line voltage
Inputs
Number
Input type
Input filter
Low input voltage
High input voltage
Input voltage maximum
Input frequency, typical
Sensor supply
Sensor connection
Module diagnosis
Individual channel diagnosis
Supply
Supply voltage
Current consumption from system current path
I
SYS
Current consumption from input current path I
General data
Weight
GFK-2958E
Chapter 5 Detailed Descriptions of I/O Modules
Specifications EP-1804
Process, parameter and diagnostic data depend on the network
adapter used (refer to the table in the section, Order and
Arrangement of the Modules)
RSTi-EP I/O communication bus
48 Mbps
4kV between the channels as well as between channels and power
supply
400V between the channels possible
4
P-switching, for Type 3 sensors as per IEC 61131-2
Input delay 10 ms
< 65V
> 80V
277V AC (UL); 264,5V AC (VDE)
50 Hz, 60 Hz
No
2-wire
Yes
No
20.4V – 28.8V
8 mA
Nil
IN
89 g (3.07 oz)
RSTi-EP User Manual 108