GE RSTi-EP User Manual page 324

Standalone 1ghz programmable controller

Hide thumbs Also See for RSTi-EP:

Table of Contents

2. Place the field bus network adapter (module side to the right) on the DIN rail so that it audibly

clicks into place.

3. Slide the bus network adapter to the left until it completely connects with the end bracket. At

the same time, press the bus network adapter as close as possible to the DIN rail so that the

network adapter is not tilted.

4. Place the first module on the DIN rail and press it down firmly. It must audibly click into place.

Attaching the Bus Network adapter to the DIN Rail

Sliding the Bus network adapter into Position

RSTi-EP User Manual

Chapter 6 Installation