GE RSTi-EP User Manual page 42

Product Part No.
Digital Input, 4 Points, EP-1214
Positive Logic 24VDC,
2, 3, or 4 Wire
Product Part No.
Digital Input, 8 Points, EP-1218
Positive Logic, 24VDC
2 Wire
Digital Input, 8 Points,
EP-1318
Positive Logic, 24VDC
3 Wire
Product Part No.
Digital Input, 4 Points, EP-12F4
Positive Logic 24VDC,
2, 3, or 4 Wire, Time
stamp
GFK-2958E
Save module parameters
Status Modbus watchdog
Modbus Connection Timeout
Writing access with multiclient
Check reference list before
exchanging data
Process alarm
Diagnostic alarm
Behavior of outputs on fieldbus
error
Module behavior on hot swap
Data format
Parameter
Ch 0 ... Ch 3: Input delay
Parameter
Ch 0 ... Ch 7: Input delay
Parameter
Ch 0 ... Ch 3: Input delay
Ch 0 ... Ch 3: TimeStamp at
edge 0-1
RSTi-EP User Manual
Chapter 3: Configuration
no / yes / Standard no, see register
0x113C-0x113F
Watchdog time in 0 *10 ms, see
steps of 10 ms register 0x1120
Connection 1 s, see register
watchdog time in sec 0x1131
write for all, write for all, see
1stWr1stServe, register
1stConn1stServe
0x1130
disabled / enabled disabled, see
register 0x1132
disabled / enabled disabled ,see
register 0x1133
disabled / enabled disabled ,see
register 0x1134
All outputs off / All outputs off, see
Enable substitute register
values / Hold
0x1135
last value
Continue data Continue data
exchange / Behavior exchange,
like fieldbus
see register
error 0x1136
Motorola / Intel Motorola, see
fieldbus register
0x1137
Optional values Default value
no (0)/0,3 ms (1) (not 3 ms
at PROFIBUS-
DP)/3ms
(2)/10 ms (3)/20 ms
(4)/40 ms (5) (not at
PROFIBUS-DP)
Optional values Default value
no (0) / 0,3 ms (1) (not 3 ms
at PROFIBUS-DP) / 3
ms
(2) / 10 ms (3) / 20 ms
(4) / 40 ms (5) (not at
PROFIBUS-DP)
Optional values Default value
no (0) / 0,3 ms (1) (not 3 ms
at PROFIBUS-DP) /3
ms
(2) / 10 ms (3) / 20 ms
(4) /40 ms (5) (not at
PROFIBUS-DP)
disabled
disabled (0) /
enabled (1)
38