Parameter Overview - GE RSTi-EP User Manual

3.9 Parameter Overview

Product Part No.
PROFIBUS DP-V1 EPXPBS001
Network Adapter
Product Part No.
PROFINET IRT EPXPNS001
Network Adapter, 2
Cu RJ45 Ports, 1024
bytes (Input + Output)
GFK-2958E
Overview of the Editable Parameters
Parameter
DP-Alarm mode
DP alarm mode V0
Diagnostic alarm †
Process alarm †
Hot-plug alarm †
† These switches are always selectable, but they only have a function in mode
V0. Diagnostic messages are generated which are not acknowledged by the
PLC.
DP alarm mode V1
Diagnostic alarm
††
Process alarm
††
Hot-plug alarm ††
These switches can be selected only in mode V1, in V0 they are inactive.
††
Diagnostic messages are generated which are acknowledged by the PLC.
Identifier-related diagnosis
Channel-related diagnosis
Module status
†††
A diagnostic block is attached to the diagnostic message.
†††
Data format
Fieldbus error output behavior
Module behavior during hot
swap
Parameter
Process alarm
Diagnostic alarm
Type of diagnostic
Behavior of outputs on fieldbus
errors
RSTi-EP User Manual
Chapter 3: Configuration
Optional values
V0 / V1
For mode V0, the alarm triggers are set in
the parameter data.
enabled / disabled
enabled / disabled
enabled / disabled
In mode V1, the alarm triggers are set in
the engineering environment.
enabled / disabled
enabled / disabled
enabled / disabled
enabled / disabled
†††
enabled / disabled
†††
enabled / disabled
Motorola / Intel
All outputs off /
activate replacement
values / retain last
value
Continue data
exchange /
behavior as with
fieldbus error
Optional values
enabled / disabled
enabled / disabled
Extended channel
diagnostic (short
diagnostic)
Manufacturer-
specific diagnostic
(complete
diagnostic)
All outputs off /
Enable substitute
value / Hold
last value
Default value
V1
disabled
disabled
enabled
disabled
disabled
enabled
enabled
enabled
enabled
Motorola
All outputs off
Continue data
exchange
Default value
disabled
disabled
Extended channel
diagnostic
(short diagnostic)
All outputs off
36