Software Control Modes - Lightware HDMI-3D-OPT-TX210A User Manual


  
4. Operation
4.7. Software Control Modes
User has more possibilities to control the device besides the front
panel buttons. The following list contains the software control modes:
▪ Lightware Device Controller (LDC) - you can connect to the device
via our control software using Ethernet or RS-232 interface and
control or configure the device as you wish. For the details see
the Software Control - Lightware Device Controller
▪ LW2 protocol commands: you can configure the device by using
the reduced command set of LW2 protocol. For more details
see the LW2 Programmer's Reference
▪ LW3 protocol commands: you can configure the device by using
the full-range command set of LW3 protocol. For more details
see the LW3 Programmer's Reference
chapter.
chapter.
chapter.
HDMI-3D-OPT series – User's Manual 26