Lightware HDMI-3D-OPT-TX210A User Manual page 79


  
8. Firmware Upgrade
Step 1. Select the package.
Click on the Browse button and select the ".lfp" file that will be used for the upgrade.
The package information is displayed:
▪ General version info, creation date, short description,
▪ Devices which are compatible with the firmware,
Components in the package with release notes.
▪
Click on the Next button and follow the instructions.
TIPS AND TRICKS: Files with ".lfp" extension are associated to LDU during installation. If you double click
on the ".lfp" file, the application is launched, the package is loaded automatically and the screen above is
shown.
HDMI-3D-OPT series – User's Manual
Step 2. Select a device.
The next step is to select the desired device(s). The available and supported devices are searched for and
listed automatically. If the desired device is not listed, update the list by clicking the Refresh button. Select
the desired device by highlighted them: highlight them with a yellow cursor, then click OK.
A tick mark can be seen in the Added column if the device was added by the user previously.
79