Leds For The Stacking Slots; Figure 6: Sfp Slot Leds; Table 3: Sfp Slot Leds On The Xs916Mx Series Switch - Allied Telesis AT-XS916MXT Installation Manual

Chapter 1: Overview
LEDs for the
Stacking Slots
26
Status LED for the Top Port
The LEDs are described in Table 3.
Table 3. SFP Slot LEDs on the XS916MX Series Switch
LED State
Off
Solid Amber
L/A LED
Flashing
Amber
Solid Green
Flashing
Green
Slots S1 and S2 are stacking slots for the VCStack feature. You can use
the slots to build a virtual switch of two switches. For background
information, refer to the XS916MX Series Installation Guide for VCStack.
Table 4 on page 27 defines the LED states when the slots contain
stacking transceivers.
Status LED for the Bottom Port
Figure 6. SFP Slot LEDs
Description
The slot is empty, the SFP transceiver
has not established a link to a network
device, or the LEDs are turned off. To turn
on the LEDs, use the eco-friendly button.
The SFP/SFP+ transceiver has
established a 1Gbps link to a network
device.
The SFP transceiver is receiving or
transmitting data at 1Gbps.
The SFP/SFP+ transceiver has
established a 10Gbps link to a network
device.
The SFP transceiver is receiving or
transmitting data at 10Gbps.