Setting The Display Parameter & Intensity (Dsplay) - FlowLine DataView LI55 Instruction Manual

DataView™ LI55 Level Controller
Setting the Display Parameter & Intensity (dsplAy)
The main display (Big) can be programmed to display:
1. Process value 1 (PV1)
2. Process value 2 (PV2)
3. Percent of PV1 (PCT)
4. Relay set points
5. Max & min values
6. Display reading and units
7. Display gross
8. Toggle net & gross
The small display (LittlE) can be programmed to display:
1. Unit
2. Process value 1 (PV1)
3. Process value 2 (PV2)
4. Percent of PV1 (PCT)
5. Relay set points
6. Max & min values
7. Engineering units or custom legends
8. Off (no display)
9. Toggle reading and units
10. Display gross
11. Toggle net/gross
Display Intensity: The meter has eight display intensity levels to give the best
performance under various lighting conditions. Select intensity 8 for outdoor
applications. The default intensity setting is 8.
50
Instruction Manual
MN301033 Rev B1