FlowLine LC10-1001 Series Owner's Manual

Compact relay controller

Advertisement

Quick Links

CALL TOLL FREE 877-742-2878 FOR SALES AND SUPPORT. CLICK HERE TO RETURN TO WEBSITE
Warranty, Service & Repair
To register your product with the manufacturer, go to the Flowline
website for on-line registration. The website address is as follows:
www.flowline.com
On-line Warranty Registration can be found under Contact
Flowline on the Navigation Bar along the side of the home page.
If for some reason your product must be returned for factory service, go to
the Flowline website listed above. Online Factory Service can be found
under Contact Flowline on the Navigation Bar along the side of the home
page. Click on Return Authorization to begin the registration process.
You will need the following information at the time of registration:
1. Part Number and full Serial Number from product
2. Name and telephone number of someone who can answer
technical questions related to the product and its application.
3. Return Shipping Address
4. Brief Description of the Symptom
5. Brief Description of the Application
Once you have received a Material Return Authorization number,
ship the product prepaid in its original packing to:
Flowline Factory Service
MRA _____
10500 Humbolt Street
Los Alamitos, CA 90720
To avoid delays in processing your repair, write the MRA on the
shipping label. Please include the information about the malfunc-
tion with your product. This information enables our service tech-
nicians to process your repair order as quickly as possible.
WARRANTY
Flowline warrants to the original purchaser of its products that such
products will be free from defects in material and workmanship under
normal use and service for a period which is equal to the shorter of
one year from the date of purchase of such products or two years from
the date of manufacture of such products.
This warranty covers only those components of the products which
are non-moving and not subject to normal wear. Moreover, products
which are modified or altered, and electrical cables which are cut to
length during installation are not covered by this warranty.
Flowline's obligation under this warranty is solely and exclusively
limited to the repair or replacement, at Flowline's option, of the prod-
ucts (or components thereof) which Flowline's examination proves to
its satisfaction to be defective. FLOWLINE SHALL HAVE NO
OBLIGATION FOR CONSEQUENTIAL DAMAGES TO PERSON-
AL OR REAL PROPERTY, OR FOR INJURY TO ANY PERSON.
This warranty does not apply to products which have been subject to
electrical or chemical damage due to improper use, accident, negli-
gence, abuse or misuse. Abuse shall be assumed when indicated by
electrical damage to relays, reed switches or other components. The
warranty does not apply to products which are damaged during ship-
ment back to Flowline's factory or designated service center or are
returned without the original casing on the products. Moreover, this
warranty becomes immediately null and void if anyone other than ser-
vice personnel authorized by Flowline attempts to repair the defective
products.
Compact Relay Controller
LC10 and LC11 Series
Owner's Manual
Version 5.2A
© 2007 FLOWLINE Inc.
All rights reserved.
Manual # MNC 11100
09/07
Products which are thought to be defective must be shipped prepaid
and insured to Flowline's factory or a designated service center (the
identity and address of which will be provided upon request) within
30 days of the discovery of the defect. Such defective products must
be accompanied by proof of the date of purchase.
Flowline further reserves the right to unilaterally wave this warranty
and to dispose of any product returned to Flowline where:
a. There is evidence of a potentially hazardous material present
with product.
b. The product has remained unclaimed at Flowline for longer than
30 days after dutifully requesting disposition of the product.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND
THE DESCRIPTION ON THE FACE OF THIS WARRANTY. This
warranty and the obligations and liabilities of Flowline under it are
exclusive and instead of, and the original purchaser hereby waives, all
other remedies, warranties, guarantees or liabilities, express or
implied. EXCLUDED FROM THIS WARRANTY IS THE IMPLIED
WARRANTY OF FITNESS OF THE PRODUCTS FOR A PARTIC-
ULAR PURPOSE OR USE AND THE IMPLIED WARRANTY OF
MERCHANT ABILITY OF THE PRODUCTS.
This warranty may not be extended, altered or varied except by a writ-
ten instrument signed by a duly-authorized officer of Flowline, Inc.
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC10-1001 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FlowLine LC10-1001 Series

  • Page 1 If for some reason your product must be returned for factory service, go to the Flowline website listed above. Online Factory Service can be found under Contact Flowline on the Navigation Bar along the side of the home page. Click on Return Authorization to begin the registration process.
  • Page 2 SPECIFICATIONS Step One Supply voltage: 120 / 240 VAC, 50 - 60 Hz. Dimension: 2.8" Consumption: 5 Watts max. LC1_-10_1 (71mm) Strobe type: 10_1: N/A 10_2: Xenon tube Strobe flash: 10_1: N/A 10_2: 1 per second Sensor inputs: LC10: (1) two-wire level switch LC11: (2) two-wire level switches Sensor supply: 13.5 VDC @ 27 mA...
  • Page 3 Flowline LC90 series. If you are unsure of the suitability of centralized system fails. a controller for your installation, consult your Flowline representa- Features of the LC10 Single Input Controller: tive for further information.
  • Page 4 Note the polarity: (+) is a 13.5 VDC, 27 mA power supply (to be FLOWLINE FLOWLINE connected to the red wire of a Flowline sensor), and (-) is the Powered Switch Reed Switch return path from the sensor (to be connected to the black wire of...
  • Page 5 INSTALLATION APPLICATION EXAMPLES Step Six Step Seven VAC Power Input Wiring: Low Level Alarm Observe the labeling on the LC10/LC11. Note: Polarity does not mat- The goal is to make sure that the liquid level does not fall below a cer- ter with the AC input terminal.
  • Page 6 For all controllers, please use the following guide to understand the sensor, and a pump that is controlled by the controller. Part of a prop- operation of the FLOWLINE LC11 controllers. er fail-safe design for this particular 1. Power LED: Make sure the Green power LED is On when system is that if power is lost to the power is supplied to the controller.

This manual is also suitable for:

Lc11 seriesLc10 seriesLc10-1051 seriesLc10-1002 seriesLc10-1052 seriesLc11-1001 series ... Show all

Table of Contents