FlowLine LC30-1001 Owner's Manual

FlowLine LC30-1001 Owner's Manual

Compact relay controller, lc30 series
Hide thumbs Also See for LC30-1001:

Advertisement

Warranty, Service & Repair
To register your product with the manufacturer, go to the Flowline
website for on-line registration. The website address is as follows:
www.flowline.com
On-line Warranty Registration can be found under Contact
Flowline on the Navigation Bar along the side of the home page.
If for some reason your product must be returned for factory service, go to
the Flowline website listed above. Online Factory Service can be found
under Contact Flowline on the Navigation Bar along the side of the home
page. Click on Return Authorization to begin the registration process.
You will need the following information at the time of registration:
1. Part Number and full Serial Number from product
2. Name and telephone number of someone who can answer
technical questions related to the product and its application.
3. Return Shipping Address
4. Brief Description of the Symptom
5. Brief Description of the Application
Once you have received a Material Return Authorization number,
ship the product prepaid in its original packing to:
Flowline Factory Service
MRA _____
10500 Humbolt Street
Los Alamitos, CA 90720
To avoid delays in processing your repair, write the MRA on the
shipping label. Please include the information about the malfunc-
tion with your product. This information enables our service tech-
nicians to process your repair order as quickly as possible.
WARRANTY
Flowline warrants to the original purchaser of its products that such
products will be free from defects in material and workmanship under
normal use and service for a period which is equal to the shorter of
one year from the date of purchase of such products or two years from
the date of manufacture of such products.
This warranty covers only those components of the products which
are non-moving and not subject to normal wear. Moreover, products
which are modified or altered, and electrical cables which are cut to
length during installation are not covered by this warranty.
Flowline's obligation under this warranty is solely and exclusively
limited to the repair or replacement, at Flowline's option, of the prod-
ucts (or components thereof) which Flowline's examination proves to
its satisfaction to be defective. FLOWLINE SHALL HAVE NO
OBLIGATION FOR CONSEQUENTIAL DAMAGES TO PERSON-
AL OR REAL PROPERTY, OR FOR INJURY TO ANY PERSON.
This warranty does not apply to products which have been subject to
electrical or chemical damage due to improper use, accident, negli-
gence, abuse or misuse. Abuse shall be assumed when indicated by
electrical damage to relays, reed switches or other components. The
warranty does not apply to products which are damaged during ship-
ment back to Flowline's factory or designated service center or are
returned without the original casing on the products. Moreover, this
warranty becomes immediately null and void if anyone other than ser-
vice personnel authorized by Flowline attempts to repair the defective
products.
Spec Tech Industrial 203 Vest Ave. Valley Park, MO 63088 Phone: 888 SPECTECH
E-mail: sales@spectechind.com
Compact Relay Controller
LC30 Series
Owner's Manual
Version 3.2A
© 2007 FLOWLINE Inc.
All rights reserved.
Manual # LC900008
Products which are thought to be defective must be shipped prepaid
and insured to Flowline's factory or a designated service center (the
identity and address of which will be provided upon request) within
30 days of the discovery of the defect. Such defective products must
be accompanied by proof of the date of purchase.
Flowline further reserves the right to unilaterally wave this warranty
and to dispose of any product returned to Flowline where:
a. There is evidence of a potentially hazardous material present
with product.
b. The product has remained unclaimed at Flowline for longer than
30 days after dutifully requesting disposition of the product.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND
THE DESCRIPTION ON THE FACE OF THIS WARRANTY. This
warranty and the obligations and liabilities of Flowline under it are
exclusive and instead of, and the original purchaser hereby waives, all
other remedies, warranties, guarantees or liabilities, express or
implied. EXCLUDED FROM THIS WARRANTY IS THE IMPLIED
WARRANTY OF FITNESS OF THE PRODUCTS FOR A PARTIC-
ULAR PURPOSE OR USE AND THE IMPLIED WARRANTY OF
MERCHANT ABILITY OF THE PRODUCTS.
This warranty may not be extended, altered or varied except by a writ-
ten instrument signed by a duly-authorized officer of Flowline, Inc.
www.spectechind.com
09/07
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LC30-1001 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for FlowLine LC30-1001

  • Page 1 If for some reason your product must be returned for factory service, go to the Flowline website listed above. Online Factory Service can be found under Contact Flowline on the Navigation Bar along the side of the home page. Click on Return Authorization to begin the registration process.
  • Page 2 Certificate: LR 79326-3 CE compliance: EN 61326 EN 61010-1 Safety Part Number Information: Part # Thread Description LC30-1001 (1) (2) 3/4” NPT Flow or No-Flow Relay Controller LC30-1051 (1) (2) 3/4” BSP Flow or No-Flow Controller LC30-1002 3/4” NPT Flow or No-Flow Controller with Strobe Alert LC30-1052 3/4”...
  • Page 3 Install In a Dry Location: The LC30 series controller hous- with any FLOWLINE N-channel flow or level switch. The relay is a ing is liquid-resistant and made of Polypropylene (PP). When single pole, double throw type; the controlled device can be connect- installed properly, the controller is not designed to be immersed.
  • Page 4 (-) is the return path from the sensor (to be connected to the black long cable runs or where excessive electrical noise is present. wire of a Flowline sensor). (S) is the Relay signal input to be con- nected to the white wire with the Green wire returning to the (-)
  • Page 5 INSTALLATION APPLICATION EXAMPLES Step Six Step Seven VAC Power Input Wiring: Low Flow Alarm: Observe the labeling on the LC30. The goal is to indicate when the flow rate falls Note: Polarity does not matter with the AC input terminal. below a certain point.
  • Page 6 For all controllers, please use the following your application, follow the calibration steps listed below. Note: the guide to understand the operation of the FLOWLINE LC30 con- switch's internal LED will be on when the switch detects no-flow and troller.

This manual is also suitable for:

Lc30-1051Lc30-1052Lc30-1002

Table of Contents