Setting Up The Meter With The Full Menu (Setup) - FlowLine DataView LI55 Instruction Manual

DataView™ LI55 Level Controller

SETTING UP THE METER WITH THE FULL MENU (sEtup)

The Setup menu is used to select:
1. Input signal the meter will accept
2. Dual-scale feature for some level applications
3. Select the display units/tags
4. Decimal point position
5. Programming Menu
6. Display parameter and intensity
7. Relay operation
8. 4-20 mA analog output scaling
Press the Enter button to access any menu or press Up button to scroll through
choices. Press the Menu button to exit at any time.
ENTE
ENTE
UP
ENTE
UP
ENTE
UP
ENTE
UP
ENTE
UP
ENTE
UP
ENTE
MN301033 Rev B1
UP
Enter
units
RIGH
UP
UP
UP
UP
ENTE ENTE
Note
Use
d-
to activate the dual-
level feature - PV1 &
(see introduction on page
Se if
d- n
displays are to be used
anything other than PV1 &
RIGH
UP UP
UP
UP
UP
Instruction Manual
UP
Note
Scal 1 & Scal 2
displayed instead
Scale
d-
selected under
Setup Input
They correspond
the PV1 &
scales
41