Mx3X-Vxc Options; Communication; Enable Tcp/Ip Version 6; Allow Remote Desktop Autologon - LXE MX3Plus Reference Manual

MX3X-VXC Options

MX3X-VXC Options
Access: Start | Settings | Control Panel | MX3X-VXC Options
Set options such as IP V6, time sync, touchscreen enable and CapsLock. Also set Status Popup taskbar icon display options
for the Admin and User.
It may be necessary to warmboot the MX3Plus after making desired changes. A pop up window indicates if a warmboot is
required.
Note: If there is no icon corresponding to this item in the Control Panel, contact your LXE Representative for upgrade
details.

Communication

Options on this tab configure communication options for the MX3Plus.

Enable TCP/IP Version 6

By default, IPv6 is disabled on the LXE device. Check this checkbox to enable IPv6.

Allow Remote Desktop Autologon

By default, Remote Desktop Autologon is disabled. Check this checkbox to enable Remote Desktop Autologon.
Note: The .RDP file must be saved in the \System folder. When prompted, use the Save As button to save the .RDP file
is the \System directry. If the .RDP file is saved in the default root folder location, the .RDP file will not persist across a
warmboot.

Autolaunch TimeSync

By default, TimeSync does not automatically run on the MX3Plus. To enable TimeSync to run automatically on the MX3Plus,
check this checkbox.
Synchronize with a Local Time Server
By default, GrabTime synchronizes via an Internet connection. To synchronize with a local time server:
MX3X - VXC Options / Communications Tab
E-EQ-MX3PLUSRG-J [ 108 ] MX3Plus Reference Guide