Local Control Panel (Lcp); Overview; Local Control Panel (Lcp) Layout - Danfoss VLT Integrated Servo Drive ISD 510 System Operating Instructions Manual

System Description

3.4 Local Control Panel (LCP)

3.4.1 Overview

The LCP is the graphical user interface on the SAB for
diagnostic and operating purposes. It is included as
standard with the SAB but can also be connected to the
advanced version servo drives using an optional cable
(M8 to LCP D-SUB extension cable).
The LCP display provides the operator with a quick view of
the state of the servo drive or SAB, depending on which
device it is connected to. The display shows parameters
and alarms/errors and can be used for commissioning and
troubleshooting. It can also be used to perform simple
functions, for example activating and deactivating the
output lines on the SAB. The LCP can be mounted on the
front of the control cabinet and then connected to the SAB
via SUB-D cables (available as an accessory).
MG75K102
Operating Instructions

3.4.2 Local Control Panel (LCP) Layout

The local control panel is divided into 4 functional groups
(see Illustration 3.10).
A. Display area
The values in the display area differ depending on whether
the LCP is connected to an ISD 510 servo drive or the SAB
as shown in Illustration 3.10 and Illustration 3.11.
The display area is activated when the ISD 510 servo drive
or SAB it is connected to receives power from the mains
supply, a DC bus terminal, or U
1
2
4
6
7
10
15
16
17
1
2
3
4
5
Illustration 3.10 Display Area when Connected to an ISD 510
Servo Drive
Danfoss A/S © 12/2015 All rights reserved.
A. Display area.
B. Display menu keys.
C. Navigation keys and indicator lights (LEDs).
D. Operation keys and reset.
.
AUX
Status
38 °C
3.1 Nm
2850 RPM
A
1.8 A
Quick Main
Status
B
Menu Menu
C
On
OK
Warn.
Alarm
D Hand Auto
O
on on
18 19 20
Display Description
Actual torque
Temperature drive module
Position
Speed
Current
3
3
271°
5
9
Alarm
Log
8
11
12
13
Reset
14
21
23
3