Danfoss VLT Integrated Servo Drive ISD 510 System Operating Instructions Manual page 18

System Description
X1 and X2: Hybrid connector (M23)
The hybrid cable provides the supply (mains and auxiliary),
the communication lines, and the safety supply for each
line of servo drives. Input and output connectors are
connected inside the servo drive.
3 3
B
A
3
7
6
Illustration 3.3 X1: Male Hybrid Connector (M23)
C
D
PE
2
8
5
Illustration 3.4 X2: Female Connector (M23)
16
®
VLT Integrated Servo Drive ISD
Pin Description Notes
A
B
C
C
D
D
PE
PE PE
2
2
8
3
5
5
6
7
8
B
A
Table 3.5 Pin Assignment of X1 and X2 Hybrid Connectors (M23)
X3: 3
The ISD 510 advanced servo drive has an additional
fieldbus port (M8) for connecting a device that
3
communicates via the selected fieldbus.
7
6
Pin Description Notes
1
2
3
4
Illustration 3.5 Pin Assignment of X3 3
(M8, 4 pole)
Danfoss A/S © 12/2015 All rights reserved.
®
510 System
UDC– Negative DC mains
supply
UDC+ Positive DC mains
supply
AUX+ Auxiliary supply
AUX– Auxiliary supply
ground
PE connector
STO+ Safety supply
STO– Safety supply
ground
TD+ Positive Ethernet
transmit
RD+ Positive Ethernet
receive
TD– Negative Ethernet
transmit
RD– Negative Ethernet
receive
rd Ethernet connector (M8, 4 pole)
3 2
4 1
TD+ Positive Ethernet
transmit
RD+ Positive Ethernet
receive
TD– Negative Ethernet
transmit
RD– Negative Ethernet
receive
Rating/parameter
Operating voltage:
Negative DC supply
(maximum –15 A)
Operating voltage:
Positive DC supply
(maximum 15 A)
24–48 V DC, 15 A
Absolute maximum
55 V DC
15 A
15 A
24 V DC ±10%, 1 A
1 A
According to standard
100BASE-T
Rating/parameter
According to standard
100BASE-T
rd
Ethernet Connector
MG75K102