Pocket Beep Operation - Icom IC-iV85 Instruction Manual

9
SUBAUDIBLE TONES

■ Pocket beep operation

This function listens for subaudible tones and can be used as
a "common pager" to inform you that someone has called
when you were away from the transceiver.
D Waiting for a call from a specific station
q Set the operating frequency.
w Set the desired CTCSS tone frequency or DTCS code in
.
SET MODE
• See p. 40 for programming details.
e Push [FUNC], then push [
• Repeat several times until " " appears when CTCSS, or " " ap-
pears when DTCS is selected.
Push
A
TONE
1
FUNC
r Push [FUNC], then push [
beep function.
• " " appears.
Push
A
P.BEEP
2
FUNC
41
](1).
TONE
CTCSS DTCS
. ](2) to activate the pocket
P BEEP
CTCSS DTCS
t When a signal with the matching tone is received, the
transceiver emits beep tones and blinks " ."
• Beep tones sound for 30 sec. and " " blinks. To stop the beeps
manually, push any key. " " continues blinking until step y is
operated.
CTCSS
y Push [PTT] to answer.
D
• " " disappears and cancels the pocket beep function automati-
cally.
DTCS