Pocket Beep And Tone Squelch; I Pocket Beep Operation; Tone Squelch Operation - Icom IC-V8000 Instruction Manual

I Pocket beep operation

This function uses subaudible tones for calling and can be
used as a "common pager" to inform you that someone has
called while you were away from the transceiver.
D Waiting for a call from a specific station
q Set the operating frequency.
w Push [SET(LOCK)] to enter set mode.
e Push [SET(LOCK)] or [MW(S.MW)] several times until "Ct"
for tone squelch or "dt" for DTCS squelch appears.
Tone squelch frqueency setting
r Rotate the tuning dial to select the desired tone squelch
frequency or DTCS code and porality.
t Push [V/MHz(SCAN] to exit set mode.
y Push [TONE(T-SCAN)] several times to indicate "
tone squelch or " D " for DTCS squelch in the function
display.
u When a signal with the matched tone is received, the
transceiver emits beep tones and flashes " ".
• Beep tones sound for 30 sec and " " flashes. To stop the beeps
and flashing manually, push any key. When the beep tones are
not stopped manually, " " continues flashing until step
i Push [PTT] to answer.
o Push [TONE(T-SCAN)] several times to cancel the func-

POCKET BEEP AND TONE SQUELCH

DTCS code setting
" for
i
.
tion.
z Set the operating frequency.
x Program the CTCSS tone frequency or DTCS code in set
mode.
• See p. 18 for programming details.
c Push [FUNC] then [iT SQLS] to turn the pocket beep
ON.
v When a signal with the matched tone is received, the
transceiver emits beep tones for 30 sec. and flashes
"S".
b Push [PTT] to answer or push [clr A(MW)] to stop the
beeps and flashing.
• Tone squelch is automatically selected.
• Pushing [FUNC] then [oTSQL] also selects the
tone squelch.
n To cancel the function, push [FUNC] then [GT-OFF].
D Calling a waiting station using pocket beep
A subaudible tone matched with the station's CTCSS tone fre-
quency or 3-digit DTCS code with polarity is necessary. Use
the tone squelch on the next page or a subaudible tone en-
coder (pgs. 00, 00)
I Tone squelch operation
The tone squelch opens only when receiving a signal with the
same pre-programmed subaudible tone.
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
48