10Pocket Beep And Tone Squelch; I Pocket Beep Operation - Icom ID-800H Instruction Manual

10
POCKET BEEP AND TONE SQUELCH

I Pocket beep operation

This function listens for subaudible tones and can be used as
a "common pager" to inform you that someone has called
while you were away from the transceiver.
D Waiting for a call from a specific station
q Set the operating frequency.
w Push [SET•LOCK] to enter set mode.
• Rotate [DIAL] to select "SET," if "CALLS" or "MESSAG" is dis-
played.
[SET•LOCK]
e Push [SET•LOCK] or [S.MW•MW] several times until "CT"
for tone squelch or "DT" for DTCS squelch appears.
Tone squelch frequency setting
r Rotate [DIAL] to select the desired tone squelch fre-
quency.
[DIAL]
55
DTCS code setting
t When operating the pocket beep function with DTCS
squelch, push [SET•LOCK] once then rotate [DIAL] to se-
lect the DTCS polarity.
DTCS polarity setting
y Push any key below the display to exit set mode.
u Push [TONE•T-SCAN] several times until "T SQLS" or
"SDTCS" are displayed to turn ON the pocket beep with
tone squelch or DTCS squelch, respectively.
[TONE•T-SCAN]
Appears when the pocket beep
with tone squelch is activated.
Appears when the pocket beep
with DTCS squelch is activated.