I [F-1]/[F-2] Keys On Hm-133 - Icom ID-800H Firmware Update

Vhf/uhf digital transceiver

Hide thumbs Also See for ID-800H:

Table of Contents

OTHER FUNCTIONS

I [F-1]/[F-2] keys on HM-133

In addition to the current band condition, the set call signs

("UrCALL," "RPT1 C" and "RPT2 C")

mode and initial set mode settings can also be memorized

into [F-1] and [F-2] keys

with the ﬁrmware update.

[F-1]/[F-2])

The memorized call signs are independent from the call sign

memory as well as the temporary setting for operation.

Programming the condition

➥ Push [FUNC] then push and hold [F-1] or [F-2] for 1 sec.

Recalling the condition

➥ Push [FUNC] then push [F-1] or [F-2] momentarily.

NOTE: The initialization of these keys is no longer avail-

able from the HM-133 key operation.

and the condition of the set

([FUNC] must be pushed before pushing

Table of Contents

Do you have a question about the ID-800H and is the answer not in the manual?