8S - 4
POWER WINDOWS
REMOVAL AND INSTALLATION (Continued)
WINDOW SWITCH AND BEZEL
REMOVAL
(1) Start at the rear center of the bezel. Using
your fingers or a trim stick, lift the bezel upwards
and slightly inboard to disconnect the two rear clips
(Fig. 5). Use care not to mar the door trim.
(2) With the rear of the bezel raised, pull the for-
ward end up to release the third clip.
(3) Disconnect the power window switches and
door lock switch wire connectors.
(4) Remove attaching screws and remove window
switch.
INSTALLATION
For installation, reverse the above procedures.
Fig. 5 Window Switch Bezel
JX